Almost every car owner has been involved in an accident at least once and suffered damage to their car. The most vulnerable to external influences is the bumper, which in most modern cars is made of plastic. Sometimes scratches, cracks, chips and other damage can easily occur when parking is unsuccessful. Renovating a plastic bumper is usually not that difficult. Let’s get started!
Refurbished plastic bumper
Of course, you can easily replace it, but it will cost a lot. If you have a budget, you should try to fix the bumper yourself. Some car owners do not consider it necessary to make minor repairs to the bumpers, ignoring cracks and chips. However, this not only looks unaesthetic, but also reduces safety, as the protective functions of the bumper are violated. As you look for the companies of bumper repair culver city you can have the best solutions right there now.
What is needed for repair and how to choose the right technology?
In order to renew the plastic bumper, it is best to purchase a special kit that contains materials:
- Laminate;
- Epoxy resin;
- Hardener;
- Sandpaper;
- Putty for plastics;
- Mixing bowl.
In addition, the following tools and materials should be available:
- Varnish, paint of any color;
- Wire;
- Metal reinforcing mesh;
- Electrodes;
- Electric soldering iron.
So you decided to fix the plastic bumper yourself. Where to start?
You must first determine the need for a plastic primer. There are several ways to accomplish this:
Ignition of plastic: To do this, they take a small piece of bumper, clean it of paint and dirt and set it on fire. In this case, you must carefully monitor the nature of the combustion of the material. If black smoke is emitted during combustion of the material, no primer is required. If the material burns like a candle, then you must apply a plastic primer before priming.
Buoyancy test: The plastic is soaked in water. If it is submerged or completely falls under water, it is not necessary to penetrate the part first. If the plastic remains on the surface, it means that a special plastic primer must be applied before applying the acrylic primer.
Repair of bumper protrusions: Small depressions in the bumper can usually be removed with a technical hair dryer. The concave surface of the plastic is heated to soften, and then the dimple is leveled until the part returns to its original appearance.
However, there are also more difficult cases where the dimple is considerable in depth and the plastic is not only bent but also taut. These dents are sometimes referred to as helmets, as is the process of repairing them. Pulling the bumper usually requires more complex manipulations.